How to clean the membrane structure and other buildings?
Nowadays, there are more and more membrane structure parking sheds and other buildings. Do you know how to clean membrane structure and other buildings
In the design and selection of membrane materials, the factors affecting fouling accumulation are as follows:
1. Local precipitation and frequency
2. Air pollution
3. Distance from deciduous trees and sticky pollen trees
4. Excreta of birds such as pigeons and seagulls
5. The inclination of the roof (try to avoid a small slope, because the rainfall can not be completely drained away, there will be residual stains after the evaporation of residual water)
6. The coating is dust-free
Membrane structure cleaning mainly includes the following points for attention:
(1) Large particle ash should be washed with clean water
(2) Clean the membrane surface with the cleaning agent specified by the manufacturer and the corresponding soft brush, sponge and cleaning equipment, and rinse with clean water, so as to wash away the dust and cleaning agent before drying the membrane surface
(3) Let the cleaning agent work for a few minutes, but avoid air drying the cleaning area
(4) For stubborn stains, you may need to brush with high concentration detergent, but avoid scraping off the surface of the film
(5) Rinse the cleaned membrane surface with clean water until no cleaning agent remains on the membrane surface
The use of cleaning machine is likely to damage the coating and even leak the film. In order to avoid it, the cleaning machine should be equipped with safety protection device to prevent the nozzle from being too close to the film surface. A simple and easy criterion is that any object that can cause skin pain may cause damage to the film.
In the design and selection of membrane materials, the factors affecting fouling accumulation are as follows:
1. Local precipitation and frequency
2. Air pollution
3. Distance from deciduous trees and sticky pollen trees
4. Excreta of birds such as pigeons and seagulls
5. The inclination of the roof (try to avoid a small slope, because the rainfall can not be completely drained away, there will be residual stains after the evaporation of residual water)
6. The coating is dust-free
Membrane structure cleaning mainly includes the following points for attention:
(1) Large particle ash should be washed with clean water
(2) Clean the membrane surface with the cleaning agent specified by the manufacturer and the corresponding soft brush, sponge and cleaning equipment, and rinse with clean water, so as to wash away the dust and cleaning agent before drying the membrane surface
(3) Let the cleaning agent work for a few minutes, but avoid air drying the cleaning area
(4) For stubborn stains, you may need to brush with high concentration detergent, but avoid scraping off the surface of the film
(5) Rinse the cleaned membrane surface with clean water until no cleaning agent remains on the membrane surface
The use of cleaning machine is likely to damage the coating and even leak the film. In order to avoid it, the cleaning machine should be equipped with safety protection device to prevent the nozzle from being too close to the film surface. A simple and easy criterion is that any object that can cause skin pain may cause damage to the film.
